PRODUCTS
Linear Move Sprinkler Irrigation Machine
The linear move sprinkler irrigation machine refers to an irrigation system in which the entire structure moves back and forth across the field in a straight line, driven by motorized wheels. This movement creates a rectangular irrigation area. It is the only type of sprinkler system capable of irrigating all types of crops. The irrigated area of a linear move machine depends on both the length of the system and the travel distance. All spans of the machine remain parallel to the ground with no wind angle, allowing the irrigation efficiency to reach up to 99%.
Category：
Retail Consultation：
+86 19501968318 (Ms. Gao)
+86 19501968318 (Ms. Gao)
Retail@dyjs.com (Ms. Gao)
Project Consultation：
+86 19501990021 (Mr. Fu)
+86 19501990021 (Mr. Fu)
international@dyjs.com (Mr. Fu)
- Advantages
- Specifications
-
- Commodity name: Linear Move Sprinkler Irrigation Machine
The linear move sprinkler irrigation machine refers to an irrigation system in which the entire structure moves back and forth across the field in a straight line, driven by motorized wheels. This movement creates a rectangular irrigation area. It is the only type of sprinkler system capable of irrigating all types of crops. The irrigated area of a linear move machine depends on both the length of the system and the travel distance. All spans of the machine remain parallel to the ground with no wind angle, allowing the irrigation efficiency to reach up to 99%.
Product Advantages
- Wide coverage and flexible mobility — a single unit can irrigate up to 3000 mu (200 hectares); high automation, easy operation, very low power consumption, and minimal labor cost
- Uniform irrigation with a distribution uniformity of over 85%; low investment cost and a service life of up to 20 years
- Suitable for irrigating grains, vegetables, cotton, sugarcane, forage, and other cash crops
-
Specifications
General Technical Conditions of Linear Machine
Linear Guidance Mode
Linear Water Supply Mode
Linear Power Supply Mode
Canal Guidance
Cable Guidance
Geomagnetic Guidance (Imported)Canal-fed and Hose-drag Types
Built-in Diesel Generator
Drag Cable and Cable ReelTechnical Parameters by Water Supply Mode
Four-wheel Canal-fed
Maximum flow up to 1000 tons/hour
Maximum equipment length up to 980m (24 spans)
Earth or concrete canal
Max fuel tank capacity: 1000 liters
Four-wheel Hose-drag
Maximum flow up to 400 tons/hour
Maximum equipment length up to 980m (24 spans)
Hose size: 4*, 5*, and 8* PE pipe or coated soft hose
Two-wheel Hose-drag
Maximum flow up to 250 tons/hour
Maximum span count: 8 spans
Hose size: 4*, 5*, and 8* PE pipe or coated soft hose
Universal Machine Canal-fed
Maximum flow up to 200 tons/hour
Maximum span count: 5 spans
Related products
Related products
